RainReserveTM is easy to install and maintain, and is adaptable to any 2"x3" downspout. The RainReserveTM

Diverter Kits work in tandem with Tank Depot’s above ground water tanks for collecting rain water.  This diverter

allows you to easily install ‘in line’ which leaves your existing drainage system in tact.

RainReserve
TM attaches to your downspout and diverts rainwater from your gutter system into the rain tank. The

 easy access door allows for clean out of potential leaves and debris without having to disassemble the whole

system. The result is naturally soft rainwater to use whenever you need to water gardens and lawns, trees and

houseplants, or for other non-potable uses. The RainReserveTM is easy to winterize too – just remove the hose

from the diverter and use the included caps to close off the outlet ports. Your drainage system will work as normal.

 In the spring, simply reattach the hose and the barrel and you are ready to collect all that precious rain water once

 again. Designed and shipped using sustainable materials (including bio-resin and recycled plastics and other

materials that leave minimal impact on the environment), the RainReserve connects directly to the 1” or 1-1/2”

inlet that comes standard on Tank Depot’s green and black water tanks .  

Includes:

· RainReserveTM Diverter

· 5' of Tubing

· 6 Self Tapping Screws

· Winterization Caps

· Threaded Hose Adapter To Connect Tube to Tank Inlet

Save the Rain Water Metal Diverter - 2 x 3 or 3 x 4

· Use the Save the Rain Diverter to channel water from your downspout to your barrel or watering can

· The small diverter dimensions are: 11L x 3W x 2.5H inches

· The large diverter dimensions are: 11L x 4W x 3H inches

· Constructed of galvanized steel for strength

· Keep the diverter in the open position or extended to reroute rainwater

· Close the diverter when your rain barrel or can is full and your downspout works as normal

· The small diverter fits standard rectangular residential downspouts, typically less than 3 1/2 inches, in metal or plastic, or 3 inch round downspouts

· The large diverter fits standard rectangular residential downspouts, typically less than 4 1/2 inches, in metal or plastic, or 4 and 5 inch round downspouts

Basic Downspout Diverter

Inlet Downspout Diverter

Offset Downspout Diverter

Rain Reserve Downspout Diverter